Hach-Lange PHOSPHAX sigma Basic User Manual - Manual (Page 102)

English 102
.
SERVICE
PRE PUMPING (filling of all hoses)
CLEANING (automatic cleaning)
CALIBRATION (trigger automatic calibration)
PRE PUMP & CALIB. (after the fully automatic filling of all hoses, calibration is triggered)
+TEST OF FUNCTION
SAMPLE PU stop, test
CHEM. PU 1 stop, test
CHEM. PU 2 stop, test
NUR PU (PU ONLY) stop, test
PISTON open
VALVE S (safety valve) off, on
VALVE Q1 off, on
VALVE Q2 off, on
VALVE QA (refrigerator) off, on
FAN off, on
HEATER test
RELEASE DOOR off, on
HUMIDITY SENSOR test
+SETTINGS
+INPUT SIGNALS
+CONTROL UNIT
COMMISSIONING
LIGHTING
PHOTOMETER VERSION
STATUS
Provides information about the current device status ([ok] or [error]) and gives detailed information in the case of error (error cause).
Remedied error causes must be acknowledged with [reset].