Hach-Lange SI794 D tr User Manual - Manual (Page 51)

LiMIT
(CtROL)
Code Display Action Choices
rL. Use of relays:
• Limit function (LiMIT)
• Controller (CtROL)
Select using ,
press enter to proceed.
Note: Selecting CtROL leads to
Controller menu group Ct.
Lo
(Hi)
For limit 1 function principle,
see Fig. on Pg. 53. Select using ,
press enter to proceed.
Limit 1 contact response
N/C: normally closed contact
N/O: normally open contact
Select using .
Press enter to proceed
N/C
(N/O)
Limit 1 setpoint
Select using , edit number using
, press enter to proceed.
0000 %
( xxxx %)
Limit 1 hysteresis
Select using , edit number using
, press enter to proceed.
0001 %
( xxxx %)
Limit 1 delay
The contact is activated with delay
(deactivated without delay)
Select position using ,
edit number using ,
press enter to proceed.
0010 sec
( 0 ... 600 sec)
L1.
51