Hach-Lange SC 1000 Controller Enhanced Communications - Manual (Page 14)

14
Installation
6. Open a web browser on the computer. Enter the IP address of the sc1000 controller
in the address bar (refer to point 3. ). The login page for the sc1000 controller is
displayed ( Figure 6 ).
7. Enter the browser password (refer to Figure 6 and Section 3.4.1 on page 13 ).
Note: A browser password is essential for web browser-based access to the sc1000 controller.
The Ethernet connection between the computer and the sc1000 controller has now been
established.
3.4.2 Establish an Ethernet connection with secure VPN tunnel
If the sc1000 controller is outside of the corporate network, an Ethernet connection with a
VPN tunnel is required (
Figure 7 ). Information on setting up a VPN tunnel is provided in
Section 3.5 on page 15 .
Figure 6 Login page for sc1000 controller
Figure 7 Ethernet connection with secure VPN tunnel