Hach-Lange SC 1000 Controller Enhanced Communications - Manual (Page 20)

20
Installation
11. Copy the files and paste into the incoming directory in the web browser ( Figure 13 ).
12. Press the CONTINUE button.
13. Confirm the update on the sc1000 controller screen.
The sc1000 controller now installs and configures the software automatically and must
then be restarted.
3.5.5 sc1000 controller: Install the VPN client using Windows Explorer/FTP
If the web browser does not support FTP protocol, data transfer via FTP in Windows
Explorer is a viable alternative.
1. Close the web browser (if still open).
2. Open Windows Explorer.
3. Enter the following FTP address into the address bar in Windows Explorer:
ftp://<IP address of sc1000 controller>/tmp/incoming
Example: ftp://192.168.154.30/tmp/incoming
4. Press the ENTER key to confirm the FTP connection.
5. Open the file manager (e.g. Microsoft Windows Explorer) and select the following
files. These must be stored on the hard disk, the network or a mobile data carrier:
From manufacturer:
• Tailored VPN client software
From VPN server provider:
• Configuration file (e.g. file with ".ovn" extension)
• Certificate (e.g. file with ".crt" extension)
• Key file (e.g. file with ".key" extension)
Figure 13 Transfer files