Hach-Lange SC 1000 Controller Enhanced Communications - Manual (Page 22)

22
Installation
3.5.6 sc1000 controller: Check VPN installation
1. Open the web browser on the computer and enter the IP address of the sc1000
controller into the address bar.
2. Enter the browser password (refer to 3.4.1 on page 13 ).
3. On the SYSTEM SETUP>BROWSER ACCESS>VPN screen, make sure that the
VPN tag is set to LAN.
4. On the SYSTEM SETUP>BROWSER ACCESS screen, make sure that the VPN tag
is set to CONNECTION.
5. On the SYSTEM SETUP>BROWSER ACCESS>VPN>CONFIG FILE screen, make
sure that no tags are highlighted red.
Red tags indicate errors (refer to Section 4 on page 41 ).
Light gray tags indicate information that is already included in the configuration and
can be ignored.
6. Enter the USERNAME and PASSWORD on the SYSTEM SETUP>BROWSER
ACCESS>VPN screen if requested to do so by the VPN server provider. These
details must be supplied by the VPN server provider.
SYSTEM SETUP
BROWSER ACCESS
VPN
VPN
SYSTEM SETUP
BROWSER ACCESS
VPN
CONFIG FILE