Hach-Lange SC 1000 Controller Enhanced Communications - Manual (Page 34)

34
Installation
4. Select a probe/device and press the ENTER button. The probe/device (including
serial number) is added to the telegram box ( Figure 27 ).
5. Select a tag (e.g. error or status) and press the ADD button. The tag selection box is
displayed with all tags that are available for the probe/device ( Figure 28 ). The error
and status registers are identical for all probes/devices ( Table 2 and Table 3 ).
6. Select tag and press the ENTER button. The new tag is added to the telegram. Select
a tag and press the UP and DOWN buttons to alter the position of the tag ( Figure 29
and Table 1 ).
Figure 27 Device list
Figure 28 Tag selection window
Figure 29 Telegram list with new tag