Hach-Lange SC 1000 Controller Enhanced Communications - Manual (Page 16)

16
Installation
From VPN server provider:
• Configuration file (e.g. file with ".ovn" extension)
• Certificate (e.g. file with ".crt" extension)
• Key file (e.g. file with ".key" extension)
3. Start sc1000 controller.
4. Remove the cover of the SD card slot on the sc1000 controller display module
( Figure 8 ).
5. Insert the SD memory card into the SD card slot on the sc1000 controller.
6. Reattach the SD card slot cover.
7. Start the installation of the VPN client via SYSTEM SETUP>STORAGE
CARD>SOFTWARE UPDATE.
The sc1000 controller installs and configures the VPN software automatically and must
then be restarted.
8. To confirm the VPN configuration enter SYSTEM SETUP>BROWSER
ACCESS>VPN.
Figure 8 Underside of display module
1 SD card slot 3 SD memory card
2 SD card slot cover
1
2 3
SYSTEM SETUP
STORAGE CARD
SOFTWARE UPDATE