Hach-Lange NO3D sc Nitrate Sensor - Manual (Page 19)

19
Section 4 Operation
4.1 Using an sc controller
Before using the sensor in combination with an sc controller, refer
to the controller user manual for navigation information.
4.2 Sensor setup
When a sensor is installed for the first time, the serial number of the
sensor is displayed as the sensor name. The sensor name can be
changed as follows:
1. Select MAIN MENU .
2. From the Main Menu, select SENSOR SETUP and confirm.
3. Select the appropriate sensor if more than one sensor is
attached and confirm.
4. Select CONFIGURE and confirm.
5. Select EDIT NAME and edit the name. Confirm or cancel to
return to the Sensor Setup menu.
4.3 Sensor data logging
The sc controller provides a data log and an event log for each
sensor. The data log contains the measured data at selected
intervals. The event log contains a large number of events that
occur on the instruments, such as configuration changes, alarms
and warnings, etc. The data log and the event log can be exported
to CSV format. For information on downloading the logs, refer to the
sc controller user manual.
4.4 Sensor diagnostics menu
SELECT SENSOR
ERROR LIST Displays all actual error codes.
WARNING LIST Displays all actual warnings.