Hach-Lange SIGMATAX2 - Manual (Page 15)

Figure 6 Sampling probe and mounting pipe
1 Mounting pipe, 2 m (78.7 in) 3 Retaining clamp
2 EPDM flat seal 4 Cylinder-head screw, M5 Ч 20 (3Ч)
N O T I C E
When carrying out an installation variant that deviates from this example, make sure that the
connection tube from the sampling probe is guided vertically upward for at least 0.5 m (19.6 in).
15
Installation
Installation using pole mount LZX414.00.00000