Hach-Lange ULTRATURB sc basic_plus_seawater - Manual (Page 14)

14
Installation
3.3 Connecting sensor cable
CAUTION
Always lay cables and hoses so that they do not pose a tripping risk.
1. Unscrew the protective caps from the controller socket and the cable plug and
retain them.
2. Pay attention to the guide in the plug and slide the plug into the socket.
3. Tighten the nut by hand.
Note: Extension cables are available in various lengths (refer to Section 7, Replacement
parts and accessories, page 29 ).
Maximum cable length 100 m (328 ft).
Fig. 4 Connection of the sensor plug to the controller
Fig. 5 Sensor connector pin assignment
Number Description Cable colour
1 +12 VDC brown
2 Ground black
3 Data (+) blue
4 Data (–) white
5 Screen Screen (grey)
6 Notch –
6
1 2
5
3 4