Hach-Lange ULTRATURB sc basic_plus_seawater - Manual (Page 17)

Operation
17
TEST/MAINT
PROBE INFO
ULTRATURBsc Instrument name
EDITED NAME
SERIAL NUMBER
RANGE
0.001 ... 1000 FNU
MODEL NUMBER Item no. sensor
SOFTWARE VERS Sensor software
DRIVER VERS
CAL. DATA
CAL. DATE Date of the last calibration
FACTOR Default setting 1.00
OFFSET
Default setting
0.000 TRBFNU
COUNTER
TOTAL TIME
PROFILE
MOTOR
MAINT. PROC.
CLN. MEAS CHAMB
OUTPUT MODE
information
Procedure during cleaning
REPLACE PROFILE
OUTPUT MODE
information
Procedure during wiper change
WIPE RESOLUTION Initiates a wiping action
SIGNALS
AVER.: Average value
S. VAL.: Individual measured value
M: Measured level
R: Reference level
Q: Quotient M/R
MOIST Relative humidity in %
OUTPUT MODE
ACTIVE
HOLD
TRANSFER
CHOICE
Behaviour of the instrument outputs
in the MAINT. PROC. menu