Hach-Lange SD900 Refrigerated Sampler, SD900 AWRS Basic User Manual - Manual (Page 10)

Figure 3 AWRS anchor bracket locations with mounting dimensions
1 Optional anchor brackets 2 Anchor brackets (2x)
Prepare the sampler
Clean the sample bottles
Clean the sample bottles and caps with a brush, water and a mild detergent. Flush the containers
with fresh water followed by a distilled water rinse.
Install a single bottle
Use a single bottle to collect one composite sample. When the bottle is full, the full bottle shut-off
stops the sample program.
1. Clean the sample bottles. Refer to Clean the sample bottles on page 10.
2. Install the sample bottle as shown in Figure 4 .
Figure 4 Single bottle installation
10 English