Hach-Lange TITRALAB 840_845 User Guide - Manual (Page 28)

28 Chapter 1
Working in Routine mode Working in Routine mode Working in Routine mode Working in Routine mode Working in Routine mode
In “ROUTINE” mode you are guided at every step, thanks to the clear-
text messages and the icons present on the large graphic display.
Access methods Access methods Access methods Access methods Access methods
A Routine operator has access to all the displays for checking purposes.
Running methods Running methods Running methods Running methods Running methods
When working in “ROUTINE” mode, it is necessary to install your
titration system according to the selected method or sequence, prior to
running a method or sequence.
1. Select the method
Refer to chapter 4.
2. Check icons
The following icons indicate the exact state of your working system (see
page 6).
3. Running methods
To run a method or sequence, refer to chapter 4.