Programming reagent parameters – Hach-Lange TITRALAB 840_845 User Guide User Manual
Page 55
Advertising
Programming guidelines
55
Programming reagent parameters
Programming reagent parameters
Programming reagent parameters
Programming reagent parameters
Programming reagent parameters
1.
If Titre = Calibrated, enter the reagent definition
parameters and go to the last Edit method screen.
2.
Press 1:
To enter Calibration parameters: general parameters
used during the calibration.
3.
Press 2:
To enter Standard parameters concerning the standard solution
used for the calibration.
4.
Press 3:
To enter the Results parameters concerning stoichiometric
coefficients for the chemical reaction (if required).
5.
Press 4:
To enter Printouts parameters defining the calibration report to
be printed.
Advertising