INTELLINET NETWORK 524681 User Manual - Manual (Page 104)

97
Click “Continue” to go back and continue with the router setup
procedure, or click “Apply” to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router reboots.)
If you want to reset all settings on this page back to previously
saved values, click “Cancel.”
3-2-6 ALG Settings
Application Layer Gateway (ALG) is a special function of this router.
It includes many preset routing rules for numerous applications that
require special support, allowing them to work with the NAT
architecture.
Click “NAT” on the left side of the Web management interface, then
click “ALG Settings.” The following message will be displayed on
your Web browser: