INTELLINET NETWORK 524681 User Manual - Manual (Page 87)

80
2-7-5 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build a
connection between wireless network clients and this wireless
router. You don’t have to select an encryption mode or input a long
encryption passphrase every time you need to set up a wireless
client: You only need to press a button on the wireless client and
this wireless router, and the WPS will do the rest for you.
This wireless router supports two types of WPS: Push-Button
Configuration (PBC) and PIN Code. If you want to use PBC, you
need to push a specific button on the wireless client to start WPS
mode, and switch this wireless router to WPS mode, too. You can
push the Reset/WPS button on this wireless router or click “Start
PBC” on the Web configuration interface to do this; if you want to
use PIN Code, you need to know the PIN code of the wireless client
and switch it to WPS mode, then provide the PIN code of the
wireless client you want to connect to this wireless router.
Click Wireless on the left side of the Web management interface,
then click “WPS.” The following message will be displayed on your
Web browser:
1
3
4
2
5