INTELLINET NETWORK 524681 User Manual - Manual (Page 88)

81
Below are descriptions of the options:
Enable WPS (1): Check this box to enable WPS function;
uncheck it to disable WPS.
Wi-Fi Protected
WPS-related system information will be
Setup Information displayed here:
(2):
WPS Status: If the wireless security (encryption)
function of this wireless router is properly set,
you’ll see “Configured” here. If the function has
not been set, you’ll see “unConfigured.”
Self PIN code: This is the WPS PIN code of this
wireless router. This code is useful when you
need to build a wireless connection using WPS
with other WPS-enabled wireless devices.
SSID: The SSID of this wireless router will be
displayed here.
Authentication Mode: The wireless security
authentication mode of this wireless router will
be displayed here. If you don’t enable the
security function of the wireless router before
WPS is activated, the router will auto-set the
security to WPA2 Mixed and generate a set of
passphrase keys for WPS connection.
Passphrase Key: The wireless security key of
the router will be displayed here.
Config Mode (3): There are Registrar and Enrollee modes for the
WPS connection. When “Registrar” is selected,
wireless clients will follow the router’s wireless
settings for WPS connection. When “Enrollee”
is selected, the router will follow the settings of
the wireless client for WPS connection.