INTELLINET NETWORK 524681 User Manual - Manual (Page 71)

64
After you click “Add,” the MAC address and IP address mapping
will be added to the Static DHCP Leases Table section.
If you want to delete a specific item, check the “Select” box of a
MAC address and IP address mapping (1), then click “Delete” (2);
if you want to delete all mappings, click “Delete All” (3).
After you finish all LAN settings, click “Apply” at the bottom of this
page. After you click “Apply,” the following message will be
displayed on your Web browser:
Click “Continue” to go back and continue with the router setup
procedure, or click “Apply” to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router is
rebooting.)
1
2 3