INTELLINET NETWORK 524681 User Manual - Manual (Page 32)

25
(maximum 32 characters). SSID is used to
identify your own wireless router from others
when there are other wireless routers in the
area. Default SSID is “INTELLINET”; it’s
recommended to change the default SSID
name to one that is easily recognizable, such
as “my home,” “office_room1,” etc.
Channel Number (4): Select a channel from the drop-down list.
Available channel numbers are 1 to 13 for
European countries; 1 to 11 for the U.S. You
can choose any channel number you want to
use, and almost all wireless clients can locate
the channel you’re using automatically without
any problem. However, it’s still useful to
remember the channel number you use. Some
wireless clients support manual channel
number select, and this would help in certain
scenarios where there is a radio communication
problem.
Associated Clients (5): Click “Show Active Clients” and an “Active
Wireless Client Table” will pop up. You can see
the status of all active wireless stations that are
connecting to the access point.
After you finish the settings, click “Next” (6); to go back to a
previous menu, click “Back.”