KT&C KVR-0412H - Manual (Page 190)

190
 Then, user should be able to operate the PTZ camera with CP1300.
 In PTZ mode, all buttons are operated according to texts written on each button. The functions are same as Front buttons of
DVR as follows:
- # + “ “ will move to saved Preset point.
- # + “ “ will save new Preset point under #.
- Press “ “ to adjust the Focus.
- Press “ “ to activate the Zoom.
WARNING
 Depending on the Protocol being used by the Speed Dome camera, controlling camera menu will differ. Please check
Speed Dome camera manual.
11.5.3 SPD Control Mode (Speed Dome)
11.5.3.1 Connection
 If the SPD Control Mode is selected followings will appear on Keyboard LCD:
 Then, user should be able to operate the Speed Dome camera directly with CP1300.
NOTE
 Please check Protocol and Baud rate before operating the Speed Dome Camera using CP1300.
11.5.3.2 Buttons
 (PRESET): Press number Key and PRESET then the camera will move to designated point.
 (PATTERN): Press number Key and PATTERN then the designated Pattern will run
 (AUTO): Press number Key and AUTO then the designated Auto will run.
 (TOUR): Press number Key and TOUR then the designated Tour will run.