KT&C KVR-0412H - Manual (Page 71)

71
⑤ The screen will show selected date/time.
⑥ Click ▲▼ button for selecting cameras.
⑦ Click then recorded data will be highlighted on the bar.
⑧ Selected camera will show the time bar 0-60 and It will be marked on 2.5minutes basis during selected time zone.
⑨ Click ( ) the box on the time indication bar to select the start time of the video playback
 Click ( ) Search key to start playing back the selected video.
 Playback continues from the designated time until the last recording time.
NOTE
Click ( ) search button to show entire channel search based on different time frames
5.2.3 Event Search
 Please click ( ) Event Search in SEARCH menu and the following input box will appear.
 This involves searching recorded video to playback the selected video of a specific date and time.
 Press SEARCH key on the viewing screen, or use the mouse wheel (central button) and the following Search menu will
appear.
① Designate Event Search start time.
② Designate Event Search end time.
③ Select camera (video) to search data.
④ Check a check box (Motion / Alarm In / Emergency / Serial In) Check box.
⑤ Click on Search Index button to recorded search event data.