KT&C KVR-0412H - Manual (Page 99)

99
6.7.2.4 Digital Zoom
 To use digital Zoom, please make the display as 1CH.
 Right click on the mouse and select Enter Digital Zoom.
 To Zoom in and out, please use the display function at the corner of the channel Display or click and drag the area wish to
zoom in.
 Zoom area can be moved by dragging the position from the corner box.
Zoom In
Zoom Out
Zoom Area : The Screen will revert to x4 digital zoom screen.
 After right mouse click on the channel that PTZ camera is connected, select “PTZ control”.
NOTE
Digital Zoom function can be only used when the display is adjusted as 1 CH.
The digital zoom function is able to zooming approximately x32.
Zoom Area
Zoom in / out function