KT&C KVR-0412H - Manual (Page 214)

214
13.6.7 Connector Wiring
13.6.7.1 4 In/ 4 out HD-SDI Connections
 Connect a 4 HD-SDI device (e.g. Camera) to each of 4 ‘HD-SDI IN’ of HD-SDI repeater.
 Connect the 4 HD-SDI devices (e.g. DVR) to each of 4 ‘HD-SDI OUT’ of HD-SDI repeater.
13.6.7.2 Power Supply Connections
 Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another
side to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
13.6.8 Cable
 75 ohm coaxial cable
NOTE
The cable above is not included in the package.
13.6.9 Display
13.6.9.1 LEDs
KEYS Operating mode
Power LED
(Red)
• Light off: Repeater off
• Light on: Repeater on
Connection LED
(Green)
• Light off: Not connected
• Light on: Connected