KT&C KVR-0412H - Manual (Page 206)

206
13.2.7 Connector Wiring
13.2.7.1 HD-SDI In/Out and HDMI In/Out Connections
 Connect a ‘HD-SDI OUT’ of HD-SDI device to ‘HD-SDI IN’ of HSC 1200 using by 75ohm coaxial cable.
 Connect a ‘HDMI OUT’ of HSC 1200 to ‘HDMI IN’ of device with HDMI output using by HDMI cable.
13.2.7.2 Video Component Input
 If users wish to link video component input (e.g. Divx, etc), assure that video component input and “COMPONENT IN”
connections are connected properly with same colors.
13.2.7.3 Power Supply Connections
 Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another
side to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
13.2.8 Cable
 75 ohm coaxial cable
 HDMI cable
 VGA cable
NOTE
The cables above are not included in the package.
13.2.9 Operation Key and Screen Display Information
First Digit No. Output resolution
1 OUT_1024x768
2 OUT_1280x720p_60Hz
3 OUT_1920x1080_30Hz
4 OUT_1920x1080_60Hz,
(default)
5 OUT_1920x1080_60Hz_RB
NOTE
Operation button: When operation button is pressed, output resolution is changed. Please note that the number shown in the
operation button is the time that users need to press the button.
Second Digit No. Input resolution
- No input detected
1 IN_1280x720p (max. 60 frames)
2 IN_1920x1080i(50 or 60 field)
3 IN_1920x1080p(30 frame only, doesn’t support 60 frame)
NOTE
Input resolution depends on the input signal.
NOTE
Please note that this device has the same function as HD-SDI repeater that extends the signal transmission distance up to
150m.