KT&C KVR-0412H - Manual (Page 46)

46
4.3.3 Multi Spot
 This connection supports multi-channel display (1/4/9/16) on spot monitor depending on its channels(4/8/16).
 Click [MS] button on the menu bar to select the Multi Spot.
 Click [1/4/9/16] button to select the multi channel split display mode.
 Please click ( ) DISPLAY>Multi Spot and the following screen will appear.
 The Multi Spot menu will allow user to adjust channel sequencing interval of Spot monitor.
 Adjust interval for ‘Full screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 Use only with 8 / 16 channel DVRs.
 Adjust interval for ‘X4 Split Screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 ‘4 Split Screen sequencing’ is disabled in the following modes.
- 8 channel DVR: 3x3 Mode
- 16 channel DVR: 4x4 Mode
 Use only with 16 channel DVR.
 Adjust interval for ‘X9 Split Screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 ‘9 Split Screen sequencing’ is disabled in 4X4 Mode.
Full Seq
Quad Seq
X9 Seq