KT&C KVR-0412H User Manual
Page 98
98
6.7.2.2 Auto Sequence
Users are able to set the auto sequence.
When user set the “Auto Sequence” display mode, screen will change to 1 channel display mode and channel will be
changed by user’s setup. For more information Please refer chapter 1.4.3.6.
6.7.2.3 Instant Playback
Instant playback is available in both Live1 and Live2 pane, but screen capture is available in either live1 or live2.
After right mouse click, move the mouse cursor to “Instant Playback”. Then, play and setup menu will appear.
-
Play: The recorded video of the pre-setup time will be displayed in the playback viewer.
-
Setup: The time of instant playback can be setup in this menu, from 1minute to 3hours.
(1Min, 3Min, 5Min, 10Min, 15Min, 30Min, 1Hour, 3Hour. The default time is 3Min.)
NOTE
Users can also set up the Instant playback in the menu, “Local Setup – Environment”.
The image capture is supported in the instant playback viewer by clicking right mouse button on “Capture Image.”
NOTE
For more detailed information of captured image, please refer to the Chapter 1.7.2.6 “Screen capture & Image”.