Coast PX10 - Manual

PX10 Instructions:
Battery Installation
Turn the head of the light in a counter-clockwise direction to remove from body of the light.
Remove the battery cartridge.
Place three AAA batteries into the cartridge in the direction indicated on the cartridge.
Replace the cartridge in the light with the red end going in first.
Replace the tail cap and turn it clockwise to tighten it until it is fully closed.
On/Off Operation
ThePX10 has separate switches for each of the white and UV LEDs.
To activate the white light, black switch. This switch is textured to allow identification in the
dark.
To activate the UV LEDs, press the purple switch.