CognitiveTPG DLXi - Manual (Page 146)

S T O R I N G D A T A I N T H E P R I N T E R M E M O R Y
NOTE: Determine nnn using the
number of dot rows actually
occupied by the stored object, rather
than from the number of dot rows
available on the physical label.
Memory space reserved by nnn is
unavailable for other uses.
Specifying too large a value wastes
image buffer space.
Storing multiple enhanced formats
can quickly use up the image
buffer. Enhanced formats will not
be stored if the total space occupied
by all enhanced stored objects
exceeds the total image buffer
space.
identifier Alphanumeric identifier for the
stored data. Must be eight or fewer
printable characters with no
spaces.
Comments This command replaces the normal label format
header line. Normal header line parameters, like dot
time, dot rows, and number of labels, are provided
with the
Format Recall
command. The Format
Recall
command cannot have any other commands
with it, so almost everything necessary to define the
label must accompany the Format Store command.
The
GRAPHIC RECALL
command is allowed within
stored formats. You can put stored graphics within
stored ASCII formats (normal or enhanced) by using
GRAPHIC STORE
to store the graphic in the usual
manner, then using
GRAPHIC RECALL
within the
stored format.
Use comments sparingly or not at all within stored
formats, since comments use one byte of memory
space per character and do not affect label
printing.
See also Format Recall
Revision F, January 2012, CognitiveTPG 137