Variable gap_size – CognitiveTPG DLXi User Manual
Page 214
P R I N T E R S E T U P
VARIABLE GAP_SIZE
Function
Manually sets the length of the gap size for gap
media. This command should also be used when
there is unprintable area on the label.
Explicit Form
VARIABLE GAP_SIZE nnn
Parameters
nnn
The length of the gap, in hundredths
of an inch.
? – Returns the current setting
status.
Comments
When using this command, the VARIABLE
LABEL_LENGTH should be used to set the
unprintable are of the label. The VARIABLE
MEASURE_LABEL command should also be used
to disable automatic measurement, which will
overwrite the value manually set.
When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label
formats.
See also
Example
The following command sets the gap size to one half
inch:
! 0 0 0 0
VARIABLE GAP_SIZE 50
VARIABLE WRITE
END
Revision F, January 2012, CognitiveTPG
205