Variable feed_type – CognitiveTPG DLXi User Manual
Page 213
P R I N T E R S E T U P
VARIABLE FEED_TYPE
Function
Selects black bar or gap indexing.
Explicit Form
Implicit Form
VARIABLE FEED_TYPE mode
V F mode
Parameters
mode
GAP
selects gap indexing
BAR
selects black bar indexing
NOTCH
selects notch indexing
? returns the current setting.
Comments The
FEED_TYPE
setting has no effect unless
automatic label indexing is enabled. Use the
command to enable automatic label indexing if
desired, but do not enable automatic label indexing
when using continuous form media.
The factory setup for some thermal transfer
printers restricts the allowable indexing method
when a ribbon is installed. Consult the applicable
printer User's Guide for more information.
When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label
formats.
Example
The following label format enables gap indexing:
! 0 0 0 0
VARIABLE FEED_TYPE GAP
VARIABLE WRITE
END
204
Revision F, January 2012, CognitiveTPG