CognitiveTPG DLXi - Manual (Page 199)

P R I N T E R S E T U P
VARIABLE COMPATIBLE POWERUP_PITCH
Function This command causes the VARIABLE PITCH
command to only change the pitch that is set at
power up.
Explicit Form VARIABLE COMPATIBLE POWERUP_PITCH
status
Implicit Form V COMPATIBLE POWERUP_PITCH status
Parameters status ON causes VARIABLE PITCH to
only take affect on power up
OFF causes VARIABLE PITCH to
take effect immediately
? returns the current setting
Comments When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label
formats.
Example The format below will cause VARIABLE PITCH to
only take affect on power up.
! 0 0 0 0
VARIABLE COMPATIBLE POWERUP_PITCH ON
VARIABLE WRITE
END
190 Revision F, January 2012, CognitiveTPG