Controlled Products Systems Group 7200ETL-IL - Manual (Page 9)

9
STEP 5. Thread chain on the sprockets as shown.
STEP 6. (Refer to page 8)
Install the other gate bracket and chain bolt on the left side of the gate.
Determine the required length of chain needed to attach to the chain bolt and still allow adjustment.
Using a chain breaking tool (not provided), remove excess chain.
Attach chain to chain bolt.
Tighten all chain brackets and chain bolts. Allow 1 inch of chain lag per 10 feet of chain.
Chain should be
level with about a 1
inch lag per 10 feet.
T O P
Chain should be aligned with all sprockets.