Magnum Venus Plastech High Volume Pro Gun 60625-1 - Manual (Page 35)

High Volume Pro Gun Manual
Rev. 05/2012 Page | 35
Assembly the Components
1. Install the Actuator Seal on top of the Actuator Cylinder.
2.
Align the Actuator Stem on the Gun Block with the Actuator Bushing in the
Cylinder Body.
3.
Attach the Gun Block to the Cylinder using the four Screws, Seals.
4.
Attach the Chopper Mount and chopper to the top of the gun block.
5. Install the Mounting Pad to the bottom of the Cylinder Body using the Screws.
CHOPPER MOUNT
MOUNTING SCREWS & SEALS
GUN BLOCK ASSEMBLY
ACTUATOR SEAL
ACTUATOR ASSEMBLY
MOUNTING PAD & SCREWS