Luminex IS Version 2.3 (IVD) - Manual (Page 18)

Luminex IS Software Manual for Version 2.3- For In Vitro Diagnostic Use x MAP Technology
8
Maintenance Tab Use the Maintenance tab to perform maintenance, XYP, daily startup,
calibration, and verification commands to maintain your system and
keep it in optimal working order.
Figure 7 Maintenance Tab
See the Commands section starting on page 29 for detailed
information about these commands:
• Warmup
• Prime
• Backflush
• Alcohol Flush
• Sanitize
• Wash
• Drain
• Soak
• Self Diagnostics
• Calibration Commands: CAL 1, CAL2, CON 1, CON2, New
CAL target and New CON target
• Sample Probe Down
• Eject/Retract