Luminex IS Version 2.3 (IVD) User Manual

Page 69

Advertising
background image

x

MAP Technology

Luminex 2.3 Software

PN 89-00002-00-254 Rev. B

59

•

The first line of text in the file must be “LX100IS Patient List”.

•

The second line of text in the file must be “[Accession#, Dilution
Factor]”.

•

Any following lines of text should be only in the format, “x, y”.
Where x = accession ID number for the patient (patient identifier
string) and y = dilution factor.

•

The dilution factor is optional, but if entered, must be a numeric
value.

•

If the dilution factor is omitted, the system defaults to one.

•

Patient list entries are case sensitive. This applies to entries made
through the graphical user interface or in a file.

The format must be like the following example or it will not load
properly. Double-check all Sample IDs before you save the newly
created batch.

An example of a typical patient list file:

LX100IS Patient List

[Accession#, Dilution Factor]

a001,1

a002,2

a003,1

b001,4

b002,0.6

c917,4

cee4gf,1

To add a Patient List file while creating a batch or multi-batch:

1. On the toolbar, click Create New Batch or Create New Multi-

Batch. The Open Template dialog box opens.

2. Select a template to create a new batch and click Select. The

Luminex Batch Setup dialog box opens showing the template
commands and the microtiter plate representation. For multi-
batches the Luminex Multi-Batch Setup dialog box opens.

3. Click Load Patient List. The Open Patient List File dialog box

opens.

4. Double-click on a patient list text file to append to the batch. The

patients from that list append to the first unassigned available
well. If all patient IDs in the batch or multi-batch are identified,
the system appends the patient list to the first empty location
after the batch’s or multi-batch’s last command list activity. If
any of the acquire sample commands within the template of the

Advertising