Diamond Products DZ-S2 - Manual (Page 17)

DZ-S2 Set-up
DZ-S2_e_0210.fm Page 17
 6HOHFWLQJ WKH VDZ EODGH
z Select the saw required blade diameter
according to the requirements of the cut
and the technical conditions.
3UHFXW
$QFKRULQJ RSWLRQV IRU VDZ EODGHV
What saw blades are to be used?
External dia.: 450 -1200 mm
Dia. location hole: 60 H7 mm
1RUPDO FXW
Anchoring
Blade cover with central screw 977065
)OXVK FXW
Anchoring
Flush cutting flange 974419
:KDW FXWWLQJ GHSWK GR \RX ZDQW WR
DFKLHYH"
The “Cutting depth” table shows how big the
saw blade must be according to the cutting
depth.
&XWWLQJ GHSWK H[DPSOH
Sawing an opening in a 35 cm thick concrete
wall:
- The saw blade must be
 PP in size
(see “Cutting depth” table).
- At the maximum plunging depth the saw blade will
have a
 FP RYHUODS at both ends of the cut (see
“Overlap” table).
A precut of dia. 800 mm is recommended for
all work.
6DZ
EODGH
GLD
&XWWLQJ
GHSWK
3UHFXW UHTXLUHG"
800 30
1R
precut
required
900 35
1000 40 Precut with small
blade required
1200 50