Diamond Products DZ-S2 - Manual (Page 36)

Maintenance DZ-S2
Page 36 DZ-S2_e_0210.fm
 ([FKDQJLQJ WRRWKHG EHOW
z Disassemble blade hub (1)
- Loosen all 6 screws 1.1
z Disassemble the protective cover (2)
z Relax toothed belt (3)
- Loosen all 8 screws 3.1
- Loosen screw 3.2 with open ended spanner
z Replace toothed belt (4)
z Tension toothed belt 977273
(Page 35)
z Check toothed belt tension
(Page 35)
z Mount protective cover
z Mount blade hub
 5HSDLU
Components other than those described
may only be replaced by authorized
personnel trained at HYDROSTRESS.