DYNAPACE Bare Board Loader User Manual
Bare board loader – 18” stack
BLE 300 18
Bare Board Loader – 18” Stack
P e o p l e a n d P r o d u c t s Y o u C a n R e l y O n
Module:
BLE-300 18 Bare Board Loader – 18” (457mm) Stack
Frame Style:
Precision welded steel framing with painted panels
Description:
The BBL is designed to pick printed circuit boards from a stack, place them
n a set of conveyor rails, and deliver them downstream.
o
Standard Features:
Can operate to load bare boards, or transfer product through
Programmable Logic Controller
New clamshell design allows for full access
Variable speed (10-30 fpm) (3 – 9.1mpm)
Precision slide quick width adjustment
Operator controls (E-stop, start/reset, cycle stop, pass through - yes/no, purge)
Single color light tower
Audible alarm
Interlocked safety cover
High Capacity – Walk in doorway allows for easy loading of up to 18 inches of product
Left to right travel, front fixed rail
Enhanced vacuum pick-up system (each cup independent)
Quick set-up for aligning lift cups to PCBs
ESD grounding receptacles
Painted sheet metal panels, “Dynapace White”
Conforms to SMEMA Spec. 1.2 and NFPA 79
Includes 1 standard communication cable
Product Handling Capability:
Edge Contact:
0.187” (4.78mm)
Length:
5” – 18” (127mm - 457mm)
Width:
3.5” – 18” (89mm - 457mm)
Thickness:
0.031” (.787mm) minimum
Weight:
Up to 5 lbs (2.7kg) per foot
Above board clearance:
1” (25mm)
Below board clearance:
0.5” (13mm)
Facilities Requirements:
Electrical:
115 VAC/60 Hz 15 amp
Air:
60 PSI 5CFM
Line height:
37” +/- 1” (940mm +/- 25.4mm)
Footprint:
48”W X 24" L. X 47" H
(1219mm W x 609mm L x 1194mm H)
PO Box 7 Palatine, IL 60078
•
847-398-5757
•
Sales Fax 847-852-3377
•
www.dynapace.com
C17181 082005