DYNAPACE Lift Gate Open User Manual
Lge 400 edge carry lift gate
LGE 400 Edge Carry Lift Gate
P e o p l e a n d P r o d u c t s Y o u C a n R e l y O n
Module:
LGE-400 Edge Carry Lift Gate Conveyor
Length:
60” (1524mm)
Frame Style:
Welded base frame with extruded aluminum and painted panels
Description:
Provides a 37” (940mm) walkway on an “as needed” basis through the production
line and is normally closed, operating as a transfer conveyor. Manually Raised.
Standard Features:
Programmable Logic Controller
Variable speed (10-45 fpm) (3 – 13.7mpm)
Easy-lift pivot gate design with buffers to cushion closing action
Operator controls (E-Stop, Reset, Release, Request)
Switch selectable buffering/non-buffering mode
“Hand crank” width adjusting
“Look up” product sensor
Left to right travel, front rail fixed
ESD safe
Painted sheet metal panels, “Dynapace White”
Conforms to SMEMA Spec. 1.2 and NFPA 79
Includes 1 standard communication cable
Product Handling Capability:
Edge Clearance:
0.187” (4.87mm)
Length:
3” – 20” (76mm - 508mm)
Width:
3.5” – 18” (88.9mm - 457mm)
Thickness:
0.045” (1mm) minimum
Weight:
Up to 5lbs (2.7kg) per foot
Above board clearance:
N/A
Below board clearance:
0.5” (13mm)
Facilities Requirements:
Electrical:
115 VAC/15 amp
Air:
N/A
Line height:
37” +/- 2” (940mm +/- 25mm)
Footprint:
60” L x 39” W x (1524mm L x 991mm W)
PO Box 7 Palatine, IL 60078
•
847-398-5757
•
Sales Fax 847-852-3377
•
www.dynapace.com
C17179 082005