DYNAPACE Heavy Duty Incline Wave Feed Conveyor User Manual
Incline wave feed conveyor
ITE 300 H30
Incline Wave Feed Conveyor
P e o p l e a n d P r o d u c t s Y o u C a n R e l y O n
Module:
ITE-300 H30 30”L Manual Incline (6 degree angle) (20" wide capable) C17437
Frame Style:
Precision welded steel framing with painted panels
Description:
Edge carry adjustable incline feed conveyor is designed for easy set-up
and alignment. This conveyor is used to feed wave solder machines.
Positioned at 6 degrees and has heavy duty belt rails capable of handling
pallets up to 20 lbs. each.
S
tandard Features:
Programmable logic controller (PLC) (available as continuous run without PLC)
Fixed incline angle (6 degrees)
Adjustable height 30"- 34" (762 – 864mm) (entrance side 32” (813) plus/minus 2” (51mm) 6 degrees)
Variable speed (2 - 25 fpm) (.61 – 7.6 mpm)
Precision slide for quick width adjustment
Heavy duty rail set with 1”(51mm) HTD belt for heavy weight durability
Operator controls (E-stop, Reset)
Control box flush to front frame
Left to right travel, front fixed rail
Designed for minimal maintenance
ESD grounding receptacles
Painted sheet metal panels, “Dynapace White”
Conforms to SMEMA Spec. 1.2 and NFPA 79
Includes 1 standard communication cable
Product Handling Capability:
Edge Contact:
0.187” (5mm) Others Available
Length:
3” – 18” (76 – 457mm)
Width:
3.5" - 20" (89 – 508mm)
Thickness:
0.031” (7874mm) minimum
Weight:
Up to 20 lb. (9.07kg) per foot
Above board clearance:
1.0 (51mm)
Below board clearance:
.50” (25.4mm)
Electrical:
115 VAC/60Hz 15 amp
Air:
N/A
Footprint:
30"L by 36" W (762L by 914mmW)
Facilities Requirements:
PO Box 7 Palatine, IL 60078
•
847-398-5757
•
Sales Fax 847-852-3377
•
www.dynapace.com
082005