DYNAPACE Lift Tilt Feed Conveyor User Manual
Lte 300 wave feed, Lift tilt feed conveyor
LTE 300 Wave Feed
Lift Tilt Feed Conveyor
P e o p l e a n d P r o d u c t s Y o u C a n R e l y O n
Module:
LTE- 300 Lift Tilt Feed Conveyor
Frame Style:
Precision welded steel framing with painted panels
Description:
24” LTF receives product from upstream conveyor then lowers and tilts to provide
lower than line level feed to various downstream wave solder machines.
Standard Features:
Programmable Logic Controller
Adjustable Feed incline angle (0 - 7 degrees)
Adjustable entry & exit height 23”- 46" (584 – 1168mm)
Operator controls (release, E-stop, reset, Manual load/transfer audit)
Variable speed (10 – 50 fpm) (3 – 15.24 mpm)
Precision slide for quick width adjustment
Left to right travel, front fixed rail
Designed for minimal maintenance
ESD grounding receptacles
Painted sheet metal panels, “Dynapace White”
Conforms to SMEMA spec. 1.2 and NFPA 79
Includes 1 standard communications cable
Product Handling Capability:
Edge Contact:
0.187” (5mm)
Length:
5” – 18” (127 – 457mm)
Width:
3.5" - 20" (89 – 508mm)
Thickness:
0.031” (.7874mm)
Weight:
Up to 5 lbs (2.7kg) per foot
Above board clearance:
1.0” (25.4mm)
Below board clearance:
.5” (13mm)
Facilities Requirements:
Electrical:
115 VAC/60Hz 15 amp
Air:
N/A
Footprint:
24"L x 46"W (609mm L x 1168mm W)
PO Box 7 Palatine, IL 60078
•
847-398-5757
•
Sales Fax 847-852-3377
•
www.dynapace.com
Rev. 082005