Figure 7 wan / lan settings – Nitek MNG6448 User Manual
Page 10
Advertising
10
Bridge Mode
Bridge Mode: In this mode it will act as a pass-through bridging your network, by associating with vari-
ous devices. This can extend your radius of your network.
Spanning Tree: Enabling spanning tree can prevent undesirable loops in the network, ensuring a
smooth running network. By default, the function is enabled.
Router Mode
The Mesh Unit can functions as router, connecting two distinct networks.
Under the bridging mode, two modes are available, WAN at Ethernet Port and WAN at Wireless Port.
You can choose either mode. Under the Access Point mode, it acts as Router. In general, WAN is de-
signed at the Ethernet port and LAN at wireless port.
Figure 7 WAN / LAN Settings
Advertising