Nitek MNG6448 - Manual (Page 27)

27
Upgrade Firmware
Figure 24 Upgrade firmware
1. Open Upgrade Firmware page
2. Click browse button and select the firmware file on local hard disk.
3. Click “Upload” button.
4. After upgrade, login again and check the software version.
Backup/Restore Settings
Figure 26 Backup /Restore setting
Backup
1. Select the BACKUP/RESTORE.
2. Click “Backup” button to save a cbackup file to hard disk.
Reetrieve Backed up Settings
1. Select the BACKUP/RESTORE.
2. Click “Browse” button to locate the backup file you want to retrieve
3. Click “Retrieve” button, the Mesh unit will restart when complete.
Restore to Factory Default
1. Select the BACKUP/RESTORE.
2. Click “Restore” button, the Mesh unit will restart when complete.