Nitek MNG6448 - Manual (Page 26)

26
Remote Management
Figure 22 Remote management
The Mesh unit supports SNMP. You should first set SNMP settings and then get MIB file from Mesh unit by ftp.
1. “Enable” the Secure Shell (SSH)
2. “Enable”
SNMP
3. Set the Trap Server Address
4. Set the Read-only Community
5. Set the Read-write Community
6. Click the “Apply” button to save setting
Get MIB file by ftp
1. Login to Mesh unit by ftp.
2. Input command “get mesh.mib”, you will find the MIB file in the current directory.
Figure 23 get mib