Nova-Tech PGW Series - Manual (Page 11)

Page 11 of 44
7.0 KEYPAD
The keypad has the following keys to operate the balance.
Keys Primary function Secondary function
To turn the balance to ON or
OFF -
[
Î0/TÍ] or
[Esc]
A combined zero and tare
function To escape from setup
functions and modes
[Unit] /
Ð or
[Down]
Selects weighing units by
cycling through a set of
enabled units To decrement or change a
displayed value or scroll
through options backwards
[Mode] /
Î or
[Advance]
Selects functions by cycling
through a set of enabled
functions, for example parts
counting, animal weighing,
percent weighing or density To advance a flashing digit
by one position to the right
To go back by one step
during setup functions
[Print] /
Í or
[Back]
Instructs the balance to print
data To advance a flashing digit
by one position to the left
[Cal] / or
Ï
[Up]
Starts the calibration function
To increase or change a
displayed value or scroll
through options forward
[Setup]/
or [Enter] Enters a function or saves a
value during setting up such
as entering unit weight or
check weighing limits manually -
7.1 NUMERIC ENTRY METHOD
To set a value when required, use the keys as given below-
- [Up] and [Down] keys to increase or decrease the flashing digit,
- [Advance] and [Back] keys to advance or move back the digit and
- [Enter] key to accept the value
© Adam Equipment Company 2007