0 unpacking the balance, 0 locating the balance, Do not place near vibrating machinery – Nova-Tech PGW Series User Manual
Page 7
Page 7 of 44
3.0 UNPACKING THE BALANCE
Remove the balance from the packing by carefully lifting it out of the box.
Inside the box you will find everything needed to start using the balance-
9 AC
adapter
9
Four rubber pan supports
9
Stainless Steel Top Pan
9
Draught shield (for mg models only)
9
This User Manual
4.0 LOCATING THE BALANCE
• The balance should not be placed in a
location that will reduce the accuracy.
• Avoid extremes of temperature. Do not place
in direct sunlight or near air conditioning
vents.
• Avoid unsuitable tables. The table or floor
must be rigid and not vibrate.
• Avoid unstable power sources. Do not use
near large users of electricity such as welding
equipment or large motors.
• Do not place near vibrating machinery.
• Avoid high humidity that might cause
condensation. Avoid direct contact with water.
Do not spray or immerse the balances in
water.
• Avoid air movement such as from fans or
opening doors. Do not place near open
windows or air-conditioning vents.
• Keep the balance clean. Do not stack material
on the balances when they are not in use.
© Adam Equipment Company 2007