Nova-Tech PW Series - Manual (Page 22)

Page 22 of 48
© Adam Equipment Company 2007
Delay
• Next, the display will show “DELAY XX” where XX is the time in
seconds taken by the balance before the sampling starts
• The XX can be changed from 0-200 using the numeric entry method
(see section 7.1)
• To confirm the desired value, press [Enter]
9.4.5 Net/Total
This function allows the user to see the total of all the net weights, the value
of which is displayed on smaller digits above the main display. The current
net weight is shown on the main display. The
[Tare] key functions the same
way as in the normal weighing.
Steps:
• Press [Mode] and then [Up] or [Down] to select Net/Total. When
“NET/TOT” is displayed press [Enter] to enter the function. The display
will show zeros in both the display areas accompanied by the symbol
“NT” indicating that the balance is in the Net/Total mode
• Place the first item. The net weight will be displayed in the main display
and the smaller digits will still display zeros
• Press [Enter]. The main display will show zeros and the smaller digits
will show the first net weight as total net weight
• Place a second item on the pan without removing the first one. The
main display will show the weight of the second item and pressing
[Enter] will make it show zeros and the smaller digits to show the total
of both the items
• Continue until all the items are added to the pan
• When finished press [Mode] to transfer the total of the net weights to
the main display
• Pressing [Print] will print a report containing individual net weights
followed by the final net weight total.