Nova-Tech PW Series - Manual (Page 33)

Page 33 of 48
© Adam Equipment Company 2007
HI LIM High Limit when check weighing
Cr Lf Inserts a blank line
END Signifies the end of the report
When END is entered the display returns to the RS-232 Sub-
menu
Enter the data to be printed on the first line by pressing the [Up] or [Down]
key to cycle through the options. If the current information is OK then press
the
[Setup]/Enter key to move to the next line.
e.g. “LINE No1” “DATE” - prints date
Select a code for one of the preset data formats as detailed above.
The next line shows:
“LINE NO 2” “TIME” - prints time
Only one item can be entered per line.
Continue until the formatting of the form is complete. There are 15 lines of
possible data. After the 15
th
line has been set or “END” has been selected,
the balance will return to the RS-232 Sub-menu.
Press [Mode] to advance to setting of the next menu or press [Esc] to return
to normal weighing.
13.4 SETUP PARAMETERS
The user parameters that control the balance are shown under the SETUP.
When “SETUP” is displayed, press the
[Setup]/Enter key. The options for
each parameter can be scrolled through by using the [Up] or [Down] key.
LANGUAGE English
French
German
Spanish
TIME Set Time using the numeric entry method
(see section 7.1)
DATE DATE FORM
EUROPE (dd/mm/yy)
USA (mm/dd/yy) Set Date using the numeric entry method
(see section 7.1)
INST ID Enter a user number to identify this
balance
BUZZER
On= Enable
OFF= Disable