Nova-Tech PW Series - Manual (Page 7)

Page 7 of 48
© Adam Equipment Company 2007
3.0 UNPACKING THE BALANCE
Remove the balance from the packing by carefully lifting it out of the box.
Inside the box you will find everything needed to start using the balance-
AC adapter
Rectangular base plate
Locating disc
Weighing platform
Guard ring
Stainless steel top pan
This User Manual
4.0 LOCATING THE BALANCE
• The balance should not be placed in a
location that will reduce the accuracy.
• Avoid extremes of temperature. Do not place
in direct sunlight or near air conditioning
vents.
• Avoid unsuitable tables. The table or floor
must be rigid and not vibrate.
• Avoid unstable power sources. Do not use
near large users of electricity such as welding
equipment or large motors.
• Do not place near vibrating machinery.
• Avoid high humidity that might cause
condensation. Avoid direct contact with water.
Do not spray or immerse the balances in
water.
• Avoid air movement such as from fans or
opening doors. Do not place near open
windows or air-conditioning vents.
• Keep the balance clean. Do not stack material
on the balances when they are not in use.