Nova-Tech LMI Series HH Metering Pump - Manual (Page 21)

21
10.2 Start/Stop
The (Start/Stop) key turns the pump on or off. If the pump
is not running, pressing this key will cause the pump to start
running. The symbol appears on the display while the pump
is running. Each time the pump strokes, the symbol clears. If
the pump is running, pressing the (Start/Stop) key will stop
the pump.
10.3 Up and Down Key
Use the (Up) and (Down) keys when: changing the stroke
frequency; altering the pressure level; activating and deactivating
the keypad lock; programming the divide and multiply values;
accessing the setup menu; and changing certain parameters included
in the setup menu. All of these functions are covered in greater detail
later in this manual.
10.4 Mode Key
Use the (Mode) key when: changing to or from external or
internal mode; accessing the pressure level; activating and
deactivating the keypad lock; and accessing specific advanced
features in the setup menu.
STOP
S T A R T
STOP
S T A R T
STOP
S T A R T
MODE I
N
T E
N
T
MODE I
N
T E
N
T